A fossil dragon skull with a crown of crystal shards that glow in the dark. In daylight the crystals are a milky white. When the lights go down they glow, after charging under normal room light (a UV torch charges them in seconds).
It hangs flat on one screw through a keyhole slot in the back plate: hook it on, then slide it down to lock it in place. It also sits on a shelf.
Pitted, weathered bone with deep eye sockets, brow ridges and a full set of bared teeth
Five large crystals plus lots of smaller ones erupting from the top, sides and back
25.2cm tall x 23.2cm wide x 14.2cm deep (depth is how far it sticks out from the wall), about 420g
3D printed to order in Bristol, UK
Colour options:
Skull: Matte Gradient Fossil as pictured (a warm bone colour that drifts through sand and brown), or pick any colour from my colour library at no extra cost
Crystals: Glow Blue as pictured, Glow Green, Glow White or Glow Rainbow. They all look milky white in daylight, and the colour shows when they glow. The back plate and the small crystals round the skull are printed in the crystal colour too
Not sure which colours to go for? Hit the 3D Preview button and try them on the model before you order.
Screw not included. Use a 5mm (No.10) pan or round head screw with a wall plug, and leave about 4 to 5mm between the wall and the underside of the head.
For indoor display only. Keep it out of direct sunlight (UV wears out the glow) and away from radiators and heat, as PLA can soften. The crystal points are pointed, so it isn't a toy and isn't suitable for young children. Dust it with a soft brush.
